Adjure Beacon 3-Wire L.E.D. Taillights

• Adjure's motorcycle bullet lights are made from die cast aluminum, polished to a fine finish and given a six step double copper chrome plate finish
• Comes with flush mount red or amber lens
• About 1 1/4" around
• These are mostly used as marker, running, turn or brake lights
• Mountable to strut and handlebar
• Reverse Set Screw (RSS) design offers four threaded holes 90 degrees apart on the housing of the Adjure bullet light
• According to the way you mount the bullet, you can put the set screw in the bottom hole with a drop of blue thread locker (included) and screw it in until it is flush with the housing
• You then push the bezel over the O-ring until it is flush with the housing so that the hole in bezel lines up directly over the set screw
• You then turn the set screw counter clockwise (loosen) until it is tight against the bezel

Note: L.E.D. light requires load equalizer (not included).