Saddlemen Drifter Teardrop Saddlebags with Shock Cutaway

• New clean styled saddlebags feature chrome buckles and stylish straps with quick-release hidden buckles
• The contoured backside allows saddlebags to fit directly over most shock absorbers, allowing saddlebag options on bikes that were previously limited due to shock and turn signal placement
• Streamlined shape allows stock turn signal locations to be used; turn signal relocator bracket included for harder to fit bikes
• Install using one of three methods
• Method one uses zippered yoke for over the fender mounting
• Method two uses hard mount bags with included saddlebag supports
• Method three uses Saddlemens S4 Quick Disconnect Mounting Kit (sold separately) for a custom mount that allows bags to come off in seconds
• Zip off yoke mounting disconnects bags from bike without removing the yoke
• Solid adjustable saddlebag support mounting brackets and hardware included Measure 20 1/2"L x 12"H x 6 1/2"D

Includes:

• Two saddlebags
• One yoke (attached to bags)
• Two saddlebag supports
• One turn signal relocator (license plate mount)
• Two sets support clip/backup plate
• Four #10 screws/washers/acorn nuts (for support clips)
• Four rubber grommets
• Eight 10mm x 3/4" x 1/2" spacers
• Eight fender washers
• Eight electrical butt connectors
• Four 9" electric wires Bolts
• Four 3/8 16 x 3" bolts
• Four 5/16 18 x 3" bolts
• Four M8 1 1/4 x 70 Bolts
• Four M6 x 1 1/2 x 70 Bolts
• Four M10 1 1/4 x 70 Bolts
• One set of instructions