CRG Billet Internal Adapter For Bar End Mirrors

• The Billet Internal Adapter for the Hindsight, Hindsight LS, Blindsight and Arrow Billet Bar End Mirrors
• Optional as an alternative to the basic Bar End Mirror mount
• This assembly will work on bars with internal diameters as small as 12mm (.475”) and as large as 19mm (.750”)
• This range covers virtually all aluminum and steel bars/clip-ons

Note: Whenever possible it is recommend mounting the Hindsight Billet Bar End Mirror with the basic mount which clamps to the outer diameter of a 7/8” handlebar/clip-on. Using the basic mount is the bar end mirror solution using the fewest parts, facilitates the easiest installation and removal, is the lightest weight, and provides for the most secure bar end mirror mounting. Use of the basic mount requires having 10mm (3/8”) of bare bar outboard of the grip/throttle assembly. Before purchasing the mirror adapter, try moving your grips and controls inboard (away from the end of the bar). In many applications, the mirror can be mounted with the basic mount. Make sure your motorcycle mirrors fit properly to your bike. These internal mirror-mount adapters ensure a snug fit on your bar ends. Adjust between 12mm and 19mm internal thread diameters.