Nuetech TUbliss Tube Replacement Kit

TUbliss replaces conventional inner tubes with a small red 100 psi insert that creates two different pressure zones inside the tire itself. This enables an incredible 100 PSI of rim protection, increased tire stability and eliminates pinch flats. In turn, this allows you to run very low tire pressure for massive gains in traction and a much plusher ride

• Tube replacement kit for tube-type motorcycle tires
• High pressure rim lock and seal secures the entire tire bead to the rim
• Full circumference pneumatic rim lock completely eliminates the use of a conventional tube
• Allows you to run a low tire pressure (as low as 10 psi) which dramatically improves traction
• Pinched tubes and flats are over; even if you get a tire puncture, the bead stays seated to the rim
• 100 psi inner bladder clamps the entire bead and side wall of the tire to the rim
• Provides full bead lock performance around the full circumference of the rim
• Protects the rim from dings and dents by holding the tire firmly and making the sidewalls stay upright and absorb the full impact
• Seal is formed against the inside of the tire itself, not the rim
• Holds the tire firmly and makes the sidewalls stay upright and absorb the full impact, unlike bending and deflection you get with conventional tubes
• Will even work with the most dented, dinged, or tweaked rim
• Secures the bead so securely that it allows a low tire pressure for improved straight line traction without the risk of a pinch flat or tire bead slippage
• Virtually flat proof when used with a tire sealant
• Sealants works directly on the tire where it matters
• Riders have reported riding longer and harder, completely unaware that they had a tire puncture
• Provides a weight savings of up to 3 pounds per wheel, which instantly translates into less rotating weight and increases acceleration
• Less unsprung weight allows significant suspension performance gains
• Eliminating a pound of rotating unsprung weight is equivalent to dropping 5 pounds of static weight
• Without the weight and friction of a conventional tube installed, tire temperatures are greatly reduced
• This also eliminates tire pressure increases during the course of a moto

Sizes

• 18" fits 18" x (1.85" - 2.15") rims
• 19" fits 19" x (1.85" - 2.15") rims
• 21" fits 21" x 1.6" rims

Note: For offroad use only.

Replace motorcycle tires quickly and efficiently with this tube replacement kit. With this kit, you will experience improved traction at a low tire pressure. This kit will hold the tire firmly to absorb full impacts.