Sidi Mag-1 Air Vented Boots

Sidi's Mag-1 Air Vented Boot combines an innovative internal bracing system with well chosen design elements and materials, Sidi created a very lightweight, yet ultra protective race boot system.

• Motorcycle boot with a base construction of Technomicro microfiber
• The rear upper is made from PU (Polyurethane) and is assembled with two screws, one on the outside under the Tecno 3 magnetic mechanism, and the other on the inside which holds the micrometric adjuster strap
• Perforated Teflon treated nylon lining in the boot's upper with a soft and comfortable Cambrelle lining used in the toe area
• TPU (Thermoplastic Polyurethane) toe shift pad
• The screws support and block the internal support system which is made with carbon fiber beams, making up the frame of the boot
• The Tecno 3 magnetic closures close the boot with an extremely resistant steel wire, which is hooked to the clip with the aid of a magnet
• Arch and Achilles areas are covered with Sidi's exclusive elastic textile and injection molded polyurethane comfort panels
• Features a perforated outer for maximum airflow with a Nylon inner sole with removable arch support pad
• The toe slider is made from Nylon and reinforced with fiberglass, fitted with an air intake and innovative alloy insert
• Arch area utilizes two TPU bands next to the Tecno 3 closures for a maximum support and wrap of the arches
• Internal support system allows excellent movement front to back while being firm side to side
• Asymmetric and shaped shock absorbing heel cup, smooth and flat inside for more adherence with the bike, with a shock absorbing system in the back and outside
• The shell and the shock absorbing system are replaceable through a screw and an interlocking system
• The Micrometric Tecno 3 magnetic closure mechanism is easy and quick to use as well as being highly adjustable and lightweight
• Widely adjustable calf area that can accommodate riders with up to a 15" calf diameter, 11 1/2" above from the bottom of their heel
• Dual compound sole
• Double stitched in all high stress areas
• The Mag-1 Are motorcycle boot comes in at 4.4 lbs, over 14 oz or 17% lighter than the Vortice boot
• All screws that attach the various technical parts are recessed so as not to damage the bike
• All bolt on parts (shin, heel, closures, and toe sliders) are replaceable
• Product meets the basic health and safety requirements of European Directive 89/686/EEC